Subscribe
Welding 1

This page will have the content of the Welding 1 class on a daily basis. Copies of handouts, power points and other info can be found on the documents page.

 

Today

3/5/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: What direction is a backhand weld done in?

Shop: WPS #4 1G Open root butt weld

 


3/3/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: Why is the keyhole important in an open root groove weld?

Shop: WPS #4 1G Open root butt weld

 


3/2/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: What is the keyhole in a groove weld?

Shop: WPS #4 1G Open root butt weld

 


2/28/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: What two things need to be considered when selecting a cutting torch tip?

Class: NCCER Module 2 Test 

Shop: WPS #4 1G Open root butt weld

 


2/27/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: Which fuel gasses are heavier than air?

Shop: WPS #4 1G Open root butt weld

 


2/26/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: What are some other fuel gasses used for OFC?

Class: Module 2 worksheet review

 


2/25/2020

Objective: SWBAT perform Oxy-fuel welding tasks

Bell Work: what is a 1G weld

Shop: WPS #4 1G Open root butt weld

 


2/20/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: 3F Lap weld video

Shop: WPS #3 3F Lap Joint vertical up with filler

 


2/18/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is the purpose of the filler metal in a weld?

Shop: WPS #3 3F Lap Joint vertical up with filler.

 


2/13/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is the purpose of the filler metal in a weld?

Shop: WPS #2 2F T-joint with filler material.

 


2/12/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: Which types of joints use groove welds?

Shop: WPS #2 2F T-joint with filler material.

 


2/11/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: Which types of joints use fillet welds?

Shop: WPS #2 2F T-joint with filler material.

 


2/10/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What are the 5 basic weld joints?

Shop: WPS #2 2F T-joint with filler material.

 


2/7/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: Quiz over ch 4, 5, and 6 in the Hobart Handouts

Shop: WPS #1 2F Lap weld with filler material.

 

 


2/5/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is undercut?

Shop: WPS #1 2F Lap weld with filler material.

 


2/4/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is overlap?

Shop: WPS #1 2F Lap weld with filler material.

 


2/3/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: Which of the three oxyacetylene flames is the hottest?

Class: WPS #1 2F Lap weld with filler material.

 


1/31/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What are the three flame types, and which one do we use when welding?

Shop: OAW without and with filler material.

 


1/30/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What gas pressures are we using for Oxy-Acetylene welding?

Shop: OAW without and with filler material.

 


1/27/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is the maximum safe working pressure for acetlyene

Class: Module 2 Review questions

 


1/23/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What are flashback arrestors?

Class: Oxy-fuel Welding Demonstrations

 


1/22/2020

Objective: SWBAT demonstrate Oxy-fuel Set-up and Shut-down procedures

Bell Work: What is the maximum safe working pressure for acetylene?

Class: Oxy-fuel setup and shut down

 


1/20/2020

Objective: SWBAT describe basic welding safety procedures

Bell Work: What does the regulator do?

Class: Module 2 Oxy-Fuel cutting

 

 


1/16/2020

Objective: SWBAT describe basic welding safety procedures

Bell Work: Why is oxyfuel best suited for use on ferrous materials?

Class: Module 2 Oxy-Fuel cutting

 


1/15/2020

Objective: SWBAT describe basic welding safety procedures

Bell Work: What are some of the fuel gasses that can be used for Oxy-fuel cutting?

Class: Intro to Oxy-Fuel welding and cutting

 


1/14/2020

Objective: SWBAT describe basic welding safety procedures

Bell Work: Which arc welding process does not use a conumable electrode?

Class: Mod 1 Welding Safety Test on NCCER

 


1/13/2020

Objective: SWBAT describe basic welding safety procedures

Bell Work: FCAW is similar to which other welding process?

Class: Mod 1 Welding Safety Video / Module 2 Terms

 


1/9/2020

Objective: SWBAT describe basic welding processes and the welding trade.

Bell Work: Which of the arc welding processes is best suited for work outdoors?

Class: Mod 1 Welding Safety 

 


1/8/2020

Objective: SWBAT describe basic welding processes and the welding trade.

Bell Work: What are the three basic Arc Welding processes?

Class: Mod 1 Welding Safety 

 


2/7/2020

Objective: SWBAT describe basic welding processes and the welding trade.

Bell Work: How would you describe welding?

Class: Mod 1 Welding Safety Terms

 


12/17/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: What is the difference between a knot and a hitch?

Class: Mod 9 Material Handling Trade Terms quiz / Knots

 


12/16/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: What is the difference between a knot and a hitch?

Class: Mod 9 Material Handling Review Questions / Knots

 


12/13/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: What is the difference between a knot and a hitch?

Class: Mod 9 Material Handling 

 


12/12/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: What are some common job site materials?

Class: Mod 9 Material Handling 

 


12/11/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: What are some common tools used for material handling?

Class: YC Dual enrollment yc.edu

 


12/10/19

Objective: SWBAT identify and describe basic material handling skills

Bell Work: Why would be important to make sure material is properly secured?

Class: Module 9 trade terms / Resume due today

 


12/9/19

Objective: SWBAT identify and describe basic employability skills

Bell Work: What does work ethic mean?

Class: Module 8 Test on Testing.NCCER.org 

 


12/6/19

Objective: SWBAT identify and describe basic employability skills

Bell Work: What does work ethic mean?

Class: Module 8 Trade Terms Quiz, Work on resume.

 


12/5/19

Objective: SWBAT identify and describe basic employability skills

Bell Work: What benifits?

Class: Module 8 review questions, Work on resume.

 


12/3/19

Objective: SWBAT identify and describe basic employability skills

Bell Work: What are soft skills?

Class: Module 8 Basic Employability Skills

 

 


12/2/19

Objective: SWBAT identify and describe basic employability skills

Bell Work: What is a resume?

Class: Mod 8 Trade Terms

 


11/26/19

Objective: SWBAT identify and describe basic communication skills.

Bell Work: What does it mean to be a good listener?

Class: Mod 7 Test on Testing.NCCER.org

 

 


11/25/19

Objective: SWBAT identify and describe basic communication skills.

Bell Work: What does it mean to be a good listener?

Class: Mod 7 Review

Module 7 Test on Tuesday!

 


11/19/19

Objective: SWBAT identify and describe basic communication skills.

Bell Work: What does it mean to be a good listener?

Class: Mod 7 Section 1 and 2 

 


11/18/19

Objective: SWBAT identify and describe basic communication skills.

Bell Work: Why is good communication important?

Class: Mod 7 Section 1 and 2 Trade Terms

 


11/15/19

Objective: SWBAT identify and describe basic construction drawings.

Bell Work: What type of plans are PI&D plans?

Class: Mod 5 Test on   testing.NCCER.org

 


11/13/19

Objective: SWBAT identify and describe basic construction drawings.

Bell Work: What type of plans would have information about the plumbing system of a building?

Class: Review for Mod 5 Test

 


11/12/19

Objective: SWBAT identify and describe basic construction drawings.

Bell Work: What type of plans would have information about the foundation of a building?

Class: Module 5 Review questions

 


11/7/19

Objective: SWBAT identify and describe basic construction drawings.

Bell Work: What is another name for civil plans?

Class: Module 4 test on Testing.NCCER.org 

 


11/5/19

Objective: SWBAT identify and describe basic construction drawings.

Bell Work: What are common types of construction drawings?

Class: Module 5 Section 1

 


11/4/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: What are construction drawings?

Class: Module 5 Trade Terms.

 


10/21/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: What is an arbor?

Class: Module 4 Trade terms quiz, Tool Box project

 


10/18/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: What should the gap between the tool rest and the grinding wheel be on a bench grinder?

Class: Module 4 Review questions

 


10/17/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: Should the trigger hold lock be used on power tools?

Class: Section 2 and 3 power point

 


10/16/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: What is the name of the part of the drill that holds the drill bits?

Class: Module 2 and 3 trade terms.

 


10/15/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: What are some sources of power for power tools?

Class: Module 4 Power Point

 


10/14/19

Objective: SWBAT identify and describe basic power tools used in construction.

Bell Work: Name some basic power tools.

Class: Module 4 Section Trade Terms /  Power Point

 


10/2/19

Objective: SWBAT identify and describe basic hand tools used in construction.

Bell Work: What kind of material are cold chisels designed for?

Class: Study for Module 3 test, tomorrow!

Module 1 Re-test due by end of the week!

 


10/1/19

Objective: SWBAT identify and describe basic hand tools used in construction.

Bell Work: What kind of material are cold chisels designed for?

Class: Hand tools performance task

Module 1 Re-test due by end of the week!

 


9/30/19

Objective: SWBAT identify and describe basic hand tools used in construction.